Dimming function.
Ultra slim design workable tri-proof light and pannel light.
7-pole pluggable clamp terminal (L,N,N,L’,1-10v+,1-10v-,SNYC) for 0.75-1.5mm2 cable.
Mounting height could up to 4m and detection range is 12m in diameter.
Detection area,time delay,stand-by period,stand-by dimming level,detection threshold could set percisely by dip switch.
5 years of warranty and IP rating would be IP 20.
Opreating temperature:-20℃—+55℃.

Specifications:

Microwave frequency	5.8GHz±75MHz
Opreating voltage	220-240VAC 50/60Hz
Switching capacity	Max.400W(Control gear)max.800w(Incandescent lamp)
Stand-by power	<1w
Detection area	10%/50%/75%/100%
Hold time	5s/30s/1min/5min/10min/20min/30min
Stand-by period	0s/10s/1min/10min/30min/1h/∞
Stand-by dimming level	10%/20%/30%/50%
Daylight threshold	2Lux/10Lux/50Lux/disable
Mounting height	Max.4m/13.12ft
Detection range	Max.12m/39.36ft
Opreating temperature	-20℃—+55℃
IP rating	IP 20
Warranty	5 years
Lifetime	50000 hours
Certificate	CE RoHS

ON/OFF Daylight sensor Detection area

Hold time Stand-by period Stand-by dimming level Warranty 5 years

Wirng diagram:

7-pole pluggable clamp terminal (L,N,N,L’,1-10v+,1-10v-,SYNC) for 1.5mm 2 cable

Dimensions:

Slim design & easily installation and widely using in the smart lighting control industry.

Detection coverage:

Max. detection range will be 12m for ceiling mounted; Max. Detection range will be 6m for wall mounted.

Dip switch setting:

Demo:

With sufficient daylight, With insufficient daylight,when

even when motion motion detected,light ON.

detected, light remains OFF.

After last detection,the light will be After the stand-by period,light OFF.

dimmed down to the stand-by

dimming level(10%,20%,30% or

50%)after holdtime.

Product Tags:

dimming sensor

motion sensor dimmer

Inquiry Cart 0