Shenzhen HAISEN Technology Co.,Ltd.
SENSOR & SMART CONTROL
Add to Cart
Compact 12V DC Motion Sensor 5.8GHz Microwave Sensor Rod Antenna 9 DIP Switch
HD016VCRH 2 is a super compact and slim design 12 volt DC microwave motion sensor with a rod antenna to be easily installed inside of LED light. 1-10V dimming motion detector with DIP switch to set all parameters and also support remote control settings.
Features:
1. 12VDC Operating Voltage with 1-10V Dimming function
2. Automatically turn on/up/down/off the LED light when detect movement or no movement.
3. With rod antenna module, easily installed inside of tri-proof and linear light with a very small holl
4. 5 years warranty
5. With 9 DIP switch keys, it provides more options for the Hold time, Detection area, Stand-by period, Stand-by dimming level and Daylight threshold.
6. Turn off the light or dim the light to a lower brightness like 10%, 20% and the like when no movement to save energy and play a role of sustainability.
7. IP20
8. Certificate of CE/RoHs
Specifications:
| Safety & EMC | Approval | CE, ROHS |
| Sensor Parameters | Operating temperature | -20°C~+60°C |
| Daylight threshold | 2Lux/10Lux/50Lux/ Disable | |
| Detection angle | 30°-150° | |
| Detection Area | 50%100% | |
| Stand-by period | 0s/30s/20min/+∞ | |
| Stand-by dimming level | 10%/20%/30%/50% | |
| Stand-by power | <0.5W(standby) | |
| Hold time | 5s/30s/1min/10min | |
| Mounting Height | Max.4m/13.12ft | |
| Detection range | Max.10m/32.8ft | |
| Wireless Parameters | Microwave Frequency | 5.8 GHz ±75 MHz |
| Microwave power | <0.3mW | |
| Input | Operating voltage | 12VDC |
| Operating current | ≤25A(Max) | |
| Others | Packaging Requirement | Bubble pack, paper flat, outer carton. |
| Installation | Installed inside lamps | |
| Warranty | 5 years | |
| IP rating | IP 20 | |
| Life time | 50000h |
ON/OFF Daylight sensor Detection area Hold time Warranty 5 years
stand-by period stand-by dimming
level
Dimensions:
Rod antenna makes reliable detecting, avoid false trigger when sensor built-in backside of metal LED plate.
Wiring Diagram:
Three control line to be connect with LED driver:
RED is for connecting with +12V
BLACK is for connecting with GND
YELLOW is for connecting with OUT
Detection coverage:
Max. detection range will be 12m/39.36ft for ceiling mounted with Max. Mounting height of 2.5-4M/8.2-13.12ft.
Dip switching settings:
Detection Area (Sensitivity)
| 1 | ||
| Ⅰ | ON | 100% |
| Ⅱ | - | 50% |
In this area,movement will be detected and able to trigger the sensor.
100% detection area is also known as the strong sensitivity.
Hold Time
| 2 | 3 | ||
| Ⅰ | ON | ON | 5s |
| Ⅱ | ON | - | 30s |
| Ⅲ | - | ON | 1min |
| Ⅳ | - | - | 10min |
The period of light
keeping 100% brightness after moving objects
leave the detection area.
Daylight Threshold
| 4 | 5 | ||
| Ⅰ | ON | ON | Disable* |
| Ⅱ | ON | - | 50Lux |
| III | - | ON | 10Lux |
| Ⅳ | - | - | 2Lux |
*Disable means the daylight sensor does not work.
The sensor will turn on light once motion is detected regardless of ambient light level.
Definition of the ambient brightness; only when the ambient brightness is lower than the preset specific lux amount, the sensor will work; when it's preset as"disable",the sensor works everytime it detects motion regardless the ambient brightness.
Stand-by Period
| 6 | 7 | ||
| Ⅰ | ON | ON | 0s |
| Ⅱ | ON | - | 30s |
| Ⅲ | - | ON | 20min |
| Ⅳ | - | - | +∞ |
The period of light keeping low output before it's completely switched off. When it's preset as"∞“, the light always keep at low output if no movement in the detection area and doesn't turn off.
Stand-by dimming level
| 8 | 9 | ||
| Ⅰ | ON | ON | 10% |
| Ⅱ | ON | - | 20% |
| Ⅲ | - | ON | 30% |
| Ⅳ | - | - | 50% |
The definition of low output in the standby period.
Application:
It could penetrate most materials like glass, plastic and the like but metal which make it be very widely used for ceiling light/tri-proof light and panel light in different occasions like parking lot, production, industrial field and so on.