Connect method	Connecting line 300mm,+12V(Red),GND(Grey),DIM+(Purple),peeled and tin-soaked 30mm
Stand-by period	0s/10s/30s/1min/5min/10min/30min/+∞
Stand-by dimming level	10%/20%/30%/50%
Daylight harvesting	It is set to be effective when the waiting time of 10%/20%/30% brightness is infinite and 120LUX/80LUX/50LUX/30LUX
Detection area	100%/75%/50%/25%
Hold time	5s/30s/1min/3min/5min/10min/20min/30min
Daylight threshold	Disable/120Lux80Lux/50Lux/30Lux/10Lux/2Lux

Daylight priority of DC sensor:

Dusk/Dawn sensor:

Dual-PD technology brings a fully automatic dusk/dawn sensor which can tell the difference between

natural light and LED light, to ensure the light will be off when needed.

Precondition of Daylight priority:

1. Standby period is +∞;

2. Standby dimming level is on 10%, 20% or 30%;

3. Daylight threshold is on 30Lux, 50Lux, 80Lux or 120Lux.

Installation of DC motion sensor:

Installation precautions of motion sensor	1. Microwave sensor can be installed in any lamp except the one with full metal shell.
	2. The detected surface cannot be shielded by metal objects.
	3. Make sure the microwave module is completely exposed outside.
	4. The detection surface of the sensor module shall be installed facing the detection area.
	5. Should be kept away from the driver to avoid interference generation and lamp flashing.
	6. Wiring must be strictly in accordance with the wiring diagram to avoid short circuit.

Plug and play design,super easy for customers to install on the lamps.

Wiring diagram of Motion Sensor:

Wire color	Cable length 300mm , +12V(Red),GND(Grey),DIM+(Purple)
Control method	On/off / 1-10V /remote control
Microwave frequency	5.8GHz±75MHz
Operating voltage	10.5-15V DC (supply current>50mA)
Sensor color	Black,white

Detection coverage of Motion Sensor:

This figure indicates the maximum distance at the highest mounting height with 100% sensitivity.

Product Description of Sensor:

Dimming mode	Add and subtract the dimmer
Connect method	Connecting line 300mm,+12V(Red),GND(Grey),DIM+(Purple)
Operating temperature	-20°C~+60°C
Operating voltage	10-15VDC (supply current>50mA)
Warranty	5 years
Stand-by power	<30mA
Function setting	By remote control
Control method	DIM/1-10V / remote control
Microwave frequency	5.8GHz±75MHz
Microwave power	<0.3mW
IP grade	IP 65