Wide detection area, range up to 14m in diameter.
Detection area, hold time, stand-by period, stand-by dimming level, daylight sensor and mode can be precisely set via remote control seeting.
Input power Max 65W, output power Max 57W.
Dimming function and LED driver.
Ultra–Slim design makes it suitable to fix within most lamps.

Description

Output	Output LED power	57W
	Output LED current	Max. 1.2A
	Output LED voltage	30-48VDC
Sensor Parameters	Hold time	5s/30s/1min/3mib/5min/10min/20min/30min
	Daylight threshold	2Lux/10Lux/30Lux/50Lux/80Lux/120Lux/Disable
	Stand-by period	0s/10s/30s/1min/5min/10min/30min/+∞
	Stand-by dimming level	10%/20%/30%/50%
	Power factor	≥0.9
	Efficiency	87% (Max.)
	Detection area	25%/50%/75%/100%
	Detection angle	30°-150°
	Mounting height	Max.6m/19.68ft
	Detection range	Max.ø14m/45.92ft
	Empty load voltage	≤63V DC
Input	Input voltage	120~240VAC 50/60Hz
	Input current	0.7-0.25A Max
	Input power	Max. 65W
	Microwave frequency	5.8GHz±75MHz
	Microwave power	<0.3mW
Others	Operating temperature	Ta:- 20°C~50°C Tc: 85°C
	Abnormal protection	SCP:Auto recovery,OVP,OCP,OTP
	EMC standard	EN55015
	Safety standard	EN61347-1 EN61347-2-13 EN60598-1
	IP rating	IP20
	Life time	50,000 hours
	Installation	Installed inside lamps
	Package requirement	Bubble pack, paper flat, outer carton

Wiring diagram

Mechanical structure(mm)

Detection coverage

Demo

Application

Product Tags:

sensor led lamp

led night lamp with sensor

Inquiry Cart 0