Shenzhen HAISEN Technology Co.,Ltd.
SENSOR & SMART CONTROL
Add to Cart
New Item Rod Antanna Microwave Sensor For Indoor Ceiling Light Use
Features
Slim design, with rod antenna
Powered by 12VDC output
0-10V Dimming
Remote control
Parameter Table
| Operating voltage | 7-15V, 12VDC Typical |
| Operating Current | ≤30mA |
| Stand-by power | ≤0.5W |
| Output Control | 0-10V Dimming |
| Detection area | 50%/100% |
| Hold time | 5S/30S/1min/10min |
| Daylight threshold | ON/OFF lux being different |
| Stand-by period | 0s/30s/20min/+∞ |
| Stand-by dimming level | 10%/20%/30%/50% |
| Microwave frequency | 5.8GHz±75MHz |
| Microwave power | <0.3mW |
| Mounting height | 2.5-4.5m |
| Detection range | Radius 3-5m |
| Detection angle | 150° Wall Mounted,360° Ceiling Mounted |
| Operating temperature | -35°C~+70°C |
| IP rating | IP20 |
| Life time | 50,000 hours |
Default Program
Can be preset with the DIP switches
Performance
* Bi-Level Dim
When motion is detected, the sensor will switch on the light to 100% brighteness.
After people leave the detection area, light remains 100% brightness for the hold time.
After holdtime, sensor dims light to standby dimming level (10% 20% 30% 50%) and keeps for a standby period.
After standby period,sensors turns OFF the light.
* ON/OFF
When motion is detected, the sensor will switch on the light to 100% brighteness.
After people leave the detection area, light remains 100% brightness for the hold time.
Preset standby period as 0S, sensor turns OFF the light after holdtime.